What's In My Cart?
Remember to click the Update Arrows to update the quantitiy

	Product	Stock	Qty	Price
	Extreme Temp Epoxy CHZA 20			$0.00
	Attan Tesla ISRA 2020 ATT 2001-005			$25.40
	Front Wheel Decal 12.7mm HP 4412-ISRA			$10.00
	BRM Brass Adapter From 3mm Down To 3/32" (2.38mm) BRM S142			$18.00
	Cahoza Alloy Endbell Complete CHZA 146			$103.90
	Speed FX Blueprinted S16D Proslot PS 2100			$39.30
	Camen / Kamen C-can Setup CA K101			$39.90
	Dubick Pin Tubing DE 405-4			$1.50
	Cahoza Long Motor 48,000 rpm CHZA 294			$36.00
	Red Fox Floating Body Mounts RF FBP			$11.40
	Super Glue HP SG			$1.60
	Loctite 380 Black Max #38004			$0.00
	loctite 414 #41404			$0.00
	Koford Endbell Epoxy KO M385			$6.30
	Super Glue HP 502SG			$1.60
	Skinners Magnet Adhesive ME SME			$0.00
	Vibra-Tite Threadlocker Low Strength VT 11102			$3.90
	UHU Endfest Epoxy Adhesive UHU 45600			$20.90
	3M Black Super Weatherstrip Adhesive 3M 03602			$17.80
	Cahoza Short Motor 25,000 rpm CHZA 281			$26.00
	Pin Tubing Pre-Cut KO M453			$15.20
	Mura C Can setup MU M320NP			$26.30
	Cahoza Short Motor 40,000 rpm CHZA 282			$32.00
	Cahoza G12 Setup CHZA 243ULB			$198.50
	Cahoza Short Motor 21500 rpm CHZA 280			$26.00
	Pin tubing Brass pre-cut 3.160" (80.26mm) HP 22406			$1.80
	Cahoza Short Motor 48,000 rpm CHZA 284			$32.80
	Pin Tubing Pre-Cut KO M453S			$0.40
	Slotworks Midnite AT Setup FO-260-FT			$22.52
	Mura C-can Setup MU M3209			$66.60
	Cahoza G12 Production setup "UL Type" CHZA 232S5			$103.10
	Cahoza G12 Production setup "UL Type" CHZA 232S			$93.80
	Cahoza G12 Production setup "O Type" CHZA 230S			$79.80
	Koford Open Armature 741/2 KO M255S			$110.00
	ProSlot Hand Wound G12 Armature, PS 701HWD-47			$98.90
	Koford conductive brush spring KO M609			$3.40
	Mack Falcon MACK FAL32			$15.00
	Betta Saloon Car Driver 1/32nd B&C 321			$4.60
	Parma Saloon Interior 1/32nd Parma PI 810S			$4.90
	Carl Nielsen uses HP Ball Bearings to set 1.667 Aussie Track Rec			$0.00
	Carl Nielsen does it yet again, 1.606 secs			$0.00