Sloting Plus Eyelet 2 x 4mm SP 108050

$5.00

Product may vary slightly from image representation.
    Brass - Eyelet for Securing Motor Lead wire

    2 mm diameter x 4 mm total length

    Bag with 10 pieces

    Suitable for other makes of slot cars
    NSR: 4821

    Other Manufacturers 1/32 slot cars such as
    Scalextric, Ninco, SCX, Carrera, NSR, Spirit, Cartrix, Avant Slot, MB Slot, SRC, Slotwings, Policar,
    Fly-Slot and Racer slot cars along with scratch build slot cars.

    Choosing the right brass eyelet is very important for two reasons; We will prevent this from leaving your housing and we will also avoid breaking your housing in the guide.

    The correct measurement of the electrical connector to be used is determined by the diameter of the hole of the guide and for this reason,
    the diameter of the connector, plus the thickness of the wires of the electrical cable and the thickness of the braid, that is,
    the sum of the three (the connector, the wires of the cable and the braid) must allow us to introduce them all together
    in the housing of the guide with the sufficient resistance so that they do not leave.

Manufacturers