Versa Board Imperial BT VBinch

23.14€

Product may vary slightly from image representation.
Versa Block

BT VBinch

Gridded out with precisely lasered, 1/16" squares.

With Retro racing in mind, it has width marks at 1.625", 3.00", 3.125", and 3.250".

One side is marked, starting at the guide post, and goes back a healthy 6.500".

The other side zero's out at the axle, and measures wheelbase up to 5.500",

along with measuring forward for guide lead, way more, than needed(1" of full gridding, and 1 1/16" of additional 1/16" markings.

The guide blade slot is barely wider than the blade, to facilitate keeping the chassis centered, to check for centered tire width spacing.

If you need a test block anyway, you might as well have one that will confirm if your chassis got bent out of square, in a wreck.

Made from .200"+ clear material.

The 5 dots are rubber feet.

Manufacturers