IC2000 TYRE ADHESIVE, 1/2 OZ.
IC2000 Tyre Adhesive is a rubber-toughened CA that forms superior shock resistant bonds on non-porous surfaces.
The black coloured CA has added flexibility for the bonding of a variety of materials including metal, rubber and silicone.
When cured, IC-2000™ is pliable enough to be carved with a hobby knife. IC-2000™ is the best adhesive for gluing slot car tyres (rubber, urethane, or silicone) to wheels.
Recommended Uses: Gluing slot car tyres to wheels.
Size: 1/2 oz.
Cure Time:
Urethane tyres – 10-15 seconds
Silicone tyres – 15-20 seconds
Once a tyre is glued to a wheel with IC-2000, the bond is permanent.
If the tyre is subsequently removed from the wheel, there is a very high probability the tyre will be damaged.
If you need to remove the tyre for subsequent reuse, do NOT use IC-2000.
Tip: To prolong the useful life of IC-2000, we strongly recommend refrigerating when not in use.
Used in many other Industries
IC-2000™ is a rubber-toughened cyanoacrylate that forms superior shock resistant bonds on non-porous surfaces.
The black colored CA has added flexibility for the bonding of metals, fiberglass, rubber, carbon-fiber and other advanced materials.
For model use, IC-2000™ is ideal for the bonding of bulkheads, formers and servo rails to the inside of fiberglass hulls and fuselages.
Setup time is 20-40 seconds, which can be accelerated with INSTA-SET™. When cured, IC-2000™ is pliable enough to be carved with a hobby knife. IC-2000™ is the best adhesive for R/C car tires.
IC-2000™ has found many uses in industrial applications, such as rubber to rubber bonding by Beech craft, carbon composite bonding by Boeing, rubber door seals by Volkswagen, speaker and subwoofer assembly in the audio industry and many others that need the most durable, shock resistant fast bonding adhesive that is available. Works Best On: * Glass * Metal * Fiberglass * Hard Plastics * Rubber * Reinforcing Works Good On: + Balsa Wood + Soft Wood + Hard Wood + Ceramics + Laminating + Water-Resistant
