Slot.it 16mm Dia. Anglewinder Gear, 28 Teeth SI GA 1628LPL

16mm Dia.

28 Teeth

Fits 3/32" axles from Slot.It, Sloting Plus, Scaleauto etc.

Application Note –
For Anglewinder Installation in the Slot.it Audi R8C, Scale Auto Radical SR9 and the Scale Auto Toyota GT1 the Flat 6 type motor must be used because of limited clearance under the body.
For the Audi R8C use a 6.5mm OD Pinion with the 15mm OD Axle Gear (SIGA1524 / SIGA1525 / SIGA1526) along with a 1mm spacer behind the gear, or alternately use a 6.0mm OD Pinion with a 16mm OD Axle Gear (SIGA1627 / SIGA1628 / SIGA1629) with a 0.75mm spacer behind the gear.